Trident-F01 Mixing Instructions

Product Onboarding & Usage Protocol

Product Onboarding

Usage Instructions

  1. Measure out all dry ingredients (Cement, Fly-Ash, Course Aggregate, Fine Aggregate)
  2. Mix all dry ingredients until uniform. Ensure there are no areas of dry ingredient clumps.
  3. Measure out expected quantity of water so that W/C ratio is within acceptable range.
  4. Add water to dry ingredients and mix until uniform consistency is achieved.
  5. Measure out quantity of Superplasticizer (PCE based Superplasticizer recommended)
  6. Add Superplasticizer to concrete and mix until desired slump is achieved. Slump should be 100mm+ for RMC mix designs and 20mm+ for Pre-Cast mix designs.
  7. Measure out quantity of Trident-F01. Dosages will vary depending on the source of other components, but generally fall within the range of 600g to 1200g per Cubic Meter of concrete.
  8. Mix Trident-F01 directly into concrete slowly while mixing to ensure proper consistency.
  9. Cast concrete into desired shape (Cylinders, Cubes, Bars, etc.) for testing purposes

Need Assistance? If you have any questions before using the product, please feel free to reach out to your local sales representative or sales@pipedreamindustries.com for technical assistance.

Usage Guidelines

Important Warnings

  • NEVER add Trident-F01 to mixing water before use.
  • NEVER dilute Trident-F01 with water before use.

Example Testing Protocol

Specifications

Parameter Value
Cement Type OPC-53
Super Plasticizer Type PolyCarboxylate Ether (PCE)
Fly Ash Type Class F
W/C Ratio 0.455
Slump (mm) 200

Material Mix Design

Material Per M³ (Kg) Ratio Per Cement Per Cement Bag
Fly Ash (Class F) 70 0.026 12.07
Cement 290 0.109 50
Water 132 0.050 22.76
Gravel 10mm 550 0.207 94.83
Gravel 20mm 688 0.259 118.62
Sand 928 0.349 160
Trident 0.8 0.000 0.14
Super Plasticizer 1.92 0.001 0.33
TOTAL 2660.72 1 446.68